About the pedal
Background we added from archived reference pages (listed under Sources below). The seller’s own listing text follows.
Boss DS-1 Distortion
The DS-1 came out in 1978 and was Boss’s first distortion pedal with a distinctly hard-clipping sound. ElectroSmash’s circuit analysis describes the current design as a transistor booster feeding an op-amp gain stage, with diodes shorting the output to ground to do the hard clipping, followed by a tone and level stage. ElectroSmash lists its gain at about 35 dB, against about 46 dB for the MXR Distortion+ and up to about 67 dB on paper for a RAT.
The chip inside changed over the years. ElectroSmash lists the 1978 original (labelled “DS-1”, made in Japan) as using a Toshiba TA7136AP pre-amplifier rather than an op-amp; a 1994 redesign (“DS1-A”) with a Rohm BA728N op-amp, still made in Japan; a 2000 release with a Mitsubishi M5223AL, made in Taiwan, which it calls the loudest and fizziest of the lot at high gain; and a 2006 release with a New Japan Radio NJM2904L. By that list, a pedal stamped “Made in Taiwan”, like this one, belongs to the 2000-and-later era.
| Introduced | 1978 |
|---|---|
| Clipping | Silicon diodes to ground (hard clipping) |
| Controls | Tone, Level, Dist |
| Op-amp history (ElectroSmash) | TA7136AP, BA728N (1994), M5223AL (2000), NJM2904L (2006) |
Sources (archived copies in the Wayback Machine):
The seller’s write-up
The original listing text, lightly cleaned up: serial numbers are masked and pickup and contact details are left out.
Boss DS-1 Distortion. Serial # ******5 {redacted}. Made in Taiwan.
Pedal is in good to very good condition, with some minor cosmetic scrapes and marks. It is in excellent working condition - no issues! Ships with new battery. No box or paperwork included, just what you see in the pictures.
Please message me with any questions and thanks for looking. Item usually ships same or next business day, USPS priority.
Please also check out my other pedal listings if you get a chance.










